Essential Role ↓

Duties and responsibilities:

• Highly technical position, you will be responsible for defining the manufacturing process “how its made” based on quoted scope of work. This is a critical position as it directly affects our bottom line.
• Contract Review ensure scope of work on PO meets quoted requirements. Work closely with Quoting, purchasing and manufacturing team members:
  • Review PO details for accuracy, review of all dwg’s, documents and spec to correct revision.
  • Work closely with purchasing to ensure subcontracted and long lead time items are highlighted
• Define Manufacturing process plan for all new work (decide how the job is going to be manufactured) including but not limited to sequencing of pre-machining, welding, machining, assembly, subcontract operations etc. Input from estimator on assumption/planned process steps as well as key technical staff may be required.
• Define any fixturing and or/special tooling requirements and ensure its ready for the job when needed.
• Prioritize job processing based on rush order requirements, due dates, long material lead times etc.
• Backup for Engineering and Document control and develop product bills of material, single or multiple (BOM) in (ERP) system, including creating of part numbers, process, and issuing packages for shop floor.
• Following ABS established safety practices and procedures.
• Assist with implementation of new ERP system. Key role in defining part number definition, Material BOM, job traveler etc.
• Assist with Development/implementation of workflow system starting with manual proof of concept then implement automation through ERP system.
• Assist with Implementation of electronic Document control system for all drawings (DWG), specs, revisions, etc.

Minimum Qualifications ↓

Skills and Qualifications:

• Minimum 15 years’ experience working in a large fabrication / machining environment - Must have shop floor manufacturing knowledge in machining, tooling, and fabrication with minimum 10 years’ experience on shop floor.
• Strong knowledge of all manufacturing processes specifically machining, welding, forming and post weld heat treat (PWHT).
• Strong knowledge in tooling & programming.
• Strong blueprint, Geometric Dimensioning & Tolerancing (GD&T) is a must.
• Must know how to develop product BOM in ERP system including creating of part numbers, process, and issuing packages for shop floor.
• Experience working safely in a heavy industrial setting.
• Able to prioritize urgency based on production requirements.
• Previous management experience is a definite asset.
• Strong analytical skills with keen attention to detail.
• Strong organizational skills, ability to organize own work effectively, meet deadlines, and adapt to changing priorities.
• Motivated and able to work independently with minimal supervision.
• Can-do, roll-up-your-sleeves attitude.

Benefits ↓

What’s in it for You:

• An attractive compensation package.
• Comprehensive health benefits.
• An employer funded Registered Retirement Savings Plan (RRSP).
• A culture that offers education programs and cross training in our internally accredited apprenticeship center.

If you are interested in this amazing career opportunity and you meet all the above qualifications, please apply directly to this ad with your resume and cover letter stating your salary expectations to This email address is being protected from spambots. You need JavaScript enabled to view it.. or use the "Send Resume" web form on this page

We thank all applicants for their interest, however only those qualified candidates will be contacted.

ABS Machining is an equal opportunity employer. If chosen to participate in the selection process, accommodations are available upon request. We will consult with the applicant to provide or arrange suitable accommodation in a manner that considers the applicant’s accessibility needs.

APPLY HERE ↓

Essential Role ↓

• Work in a safe manner, complying with all health, safety and environmental guidelines/regulations
• Welding of large complex components using different working knowledge of various types of metals, filler metals, welding parameters, preheat, post heat, interpass temperature.
• Ability to understand and follow welding procedures and specification
• Follow all QA requirements and complete required documentation

Minimum Qualifications ↓

• Ability to perform manual welding and repairs to RT/UT quality standards and in multiple processes preferred.
• Working knowledge and experience with overhead cranes ,lifting and turning weldments from 10 up to 80 ton.
• Ability to plan out weld sequence on weldment for proper weld wrapping and welding efficiency
• Ability to work with minimal supervision and meet required Quality standards and Completion times.

APPLY HERE ↓

Essential Role ↓

• Fabricate components using engineered drawings and blueprints within customer tolerances
• Interpret weld symbols in imperial, metric or decimal dimensions
• Instruct welders on proper sequences to minimize distortion in order to meet customer requirements
• Safety rigging and hoisting of materials and parts in a shop environment using overhead/jib cranes
• Operate oxy-acetylene torch safely and efficiently
• Follow ABS Machining safe work procedures and follow all Health & Safety Regulations

Minimum Qualifications ↓

• Minimum 5 years experience fitting in a large/heavy custom steel fabrication environment
• Strong written and verbal communication skills
• Strong math skills
• Must be able to work to close tolerance
• Lift up to 50 lbs.
• Team player with a positive attitude

APPLY HERE ↓

Essential Role ↓

Currently we are looking for a Machine Tool Mechanic, based in our Burlington facility. Reporting to the Maintenance Schedule, you will be responsible to maintain, build and repair equipment in an organized, efficient and timely manner. The ideal candidate will:

• Repair, install and troubleshoot large CNC Horizontal and Vertical Boring Mill’s
• Repair, renew and/or replace worn out bearings, shafts, gears, and re-assemble and check functionally test of machine tools
• Preform laser calibration of CNC Machine Tool Axis and precision levelling
• Examine parts for defects, breakage or excessive wear. Re-engineer and/or upgrade defected arears on the machine as required
• Study blueprints and manufacturer manuals to determine correct installation procedure and operation of machine.
• Mechanical troubleshooting as required
• Perform inspection and tests on machine tools (alignment test, ball test, squareness; using electronic level and laser)
• Work with original machine tool manufacturer to upgrade or troubleshoot problems or functionality
• Follow established safety practices and regulation.

Minimum Qualifications ↓

• Good mechanical aptitude and work ethic
• Willing to work overtime and be on call for after hour work
• Experience with machine tools or other related equipment
• Minimum 5 years experience in a machine shop environment
• Knowledge of Fanuc and Siemens controls a definite asset
• Strong knowledge of hydraulics, pneumatic, electrical and CNC controls
• Previous experience with large machine tools (PAMA, Toshiba, Berthiez, Shiesse)
• Knowledge of electrical schematics / electronics an asset
• Strong machining skills
• Ability to work within tight deadlines and under pressure
• Ability to read blueprint of electric and hydraulic schematics to diagnose/troubleshoot problems
• Strong organizational and communicational skills in both oral and written form
• Previous experience working with overhead cranes an asset.
• Must have a valid drivers' license.
• Competition of secondary school

APPLY HERE ↓

Essential Role ↓

• Responsible for setup and operation of large CNC Horizontal Lathe
• Machine product (5-60 tons) to specified requirements as defined on Job Travelers, Drawings, and Sketches. Must be able to read blueprints and various symbols regarding tolerances, surface finishes, etc.
• Pre-inspection of parts to ensure product compliance is achievable prior to metal removal process.
• Verify tooling requirements are met in advanced of the commencement of each job.  Escalate any issues/concerns to supervisor.
• Machine product at optimal conditions to maintain cost effectiveness of machining process.
• Ability to read and understand programs to a degree that will allow you to modify / edit programs.
• Maintain tooling in peak conditions.
• Verify dimensions of parts machined using precision measuring instruments as required.
• Practice excellent general housekeeping, including but not limited to, his/her work area, chip removal, floor areas, benches, storage areas to ensure a safe work environment.
• Perform daily machine checks per preventative maintenance program and safety procedures.
• Maintains measuring instruments in proper working condition by regular cleaning and calibration.  Stores instruments in safe location both during use and after completion.
• Maintains equipment in safe and production condition, including but not limited to, regular routine lubrication, cleaning, maintaining coolant levels.
• Use of overhead crane to setup and move parts.
• Follow ABS established safety practices and regulation.  Reports any unsafe conditions or practices to management of ABS Machining Inc.

Minimum Qualifications ↓

• Minimum 5 years CNC "CUSTOM - ONE OFF" machining experience, consisting of machine setup & Operation of CNC Horizontal Lathe
• General machinist certification an asset.
• Challenged daily in working with large complex & fabricated components, where material variation and conditions require an analytical approach to machining of product.
• Ability to read & interpret blue prints, drawings, charts & tables.
• Motivated and able to work independently with minimal supervision.
• Strong analytical skills and keen attention to detail.
• Previous experience working with overhead cranes an asset.

APPLY HERE ↓

Essential Role ↓

• Responsible for setup and operation of large CNC Horizontal Boring mills
• Machine product (5-60 tons) to specified requirements as defined on Job Travelers, Drawings, and Sketches. Must be able to read blueprints and various symbols regarding tolerances, surface finishes, etc.
• Pre-inspection of parts to ensure product compliance is achievable prior to metal removal process.
• Verify tooling requirements are met in advanced of the commencement of each job.  Escalate any issues/concerns to supervisor.
• Machine product at optimal conditions to maintain cost effectiveness of machining process.
• Ability to read and understand programs to a degree that will allow you to modify / edit programs.
• Maintain tooling in peak conditions.
• Verify dimensions of parts machined using precision measuring instruments as required.
• Practice excellent general housekeeping, including but not limited to, his/her work area, chip removal, floor areas, benches, storage areas to ensure a safe work environment.
• Perform daily machine checks per preventative maintenance program and safety procedures.
• Maintains measuring instruments in proper working condition by regular cleaning and calibration.  Stores instruments in safe location both during use and after completion.
• Maintains equipment in safe and production condition, including but not limited to, regular routine lubrication, cleaning, maintaining coolant levels.
• Use of overhead crane to setup and move parts.
• Follow ABS established safety practices and regulation.  Reports any unsafe conditions or practices to management of ABS Machining Inc.

Minimum Qualifications ↓

• Minimum 5 years CNC "CUSTOM - ONE OFF" machining experience, consisting of machine setup & Operation of CNC Boring Mills (Horizontal)
• General machinist certification an asset.
• Challenged daily in working with large complex & fabricated components, where material variation and conditions require an analytical approach to machining of product.
• Ability to read & interpret blue prints, drawings, charts & tables.
• Motivated and able to work independently with minimal supervision.
• Strong analytical skills and keen attention to detail.
• Previous experience working with overhead cranes an asset.

APPLY HERE ↓

Essential Role ↓

• Assembly of large complex parts as per traveler, blueprints, engineering drawings, and written instructions.
• Assemble, fit and install prefabricated parts to form sub-assemblies of finish products using hand and power tools
• Position, align and adjust parts for proper fit and assembly
• Quality inspection of parts
• Deburring, grinding, drilling, tapping, honing as needed.
• Tack welding of pieces together to assemble parts.
• Working with dry ice or liquid nitrogen for assembly fitting.
• Must be able to measure with micrometers.
• Follow ABS established safety practices and regulation. Reports any unsafe conditions or practices to management of ABS Machining Inc.

Minimum Qualifications ↓

• Must have previous assembly experience working in fast passed custom machining job shop
• Strong Mechanical aptitude.  Must be able to use measuring instruments such as calipers and micrometers.
• Ability to read and interpret blueprints, drawings, & schematics.
• Experience with use of air tools, impact wrenches, die grinders, electrical drills, and general labor.
• Flexibility and adaptability are very key attributes needed to success in this role. Forklift & Crane Experience required
• Strong analytical skills and keen attention to detail.  Able to work overtime.
• Strong organizational skills, ability to organize own work effectively, meet deadlines, and adapt to changing priorities.

APPLY HERE ↓

Essential Role ↓

• Responsible for setup and operation of large CNC Vertical Boring mills
• Machine product (5-60 tons) to specified requirements as defined on Job Travelers, Drawings, and Sketches. Must be able to read blueprints and various symbols regarding tolerances, surface finishes, etc.
• Pre-inspection of parts to ensure product compliance is achievable prior to metal removal process.
• Verify tooling requirements are met in advanced of the commencement of each job.  Escalate any issues/concerns to supervisor.
• Machine product at optimal conditions to maintain cost effectiveness of machining process.
• Ability to read and understand programs to a degree that will allow you to modify / edit programs.
• Maintain tooling in peak conditions.
• Verify dimensions of parts machined using precision measuring instruments as required.
• Practice excellent general housekeeping, including but not limited to, his/her work area, chip removal, floor areas, benches, storage areas to ensure a safe work environment.
• Perform daily machine checks per preventative maintenance program and safety procedures.
• Maintains measuring instruments in proper working condition by regular cleaning and calibration.  Stores instruments in safe location both during use and after completion.
• Maintains equipment in safe and production condition, including but not limited to, regular routine lubrication, cleaning, maintaining coolant levels.
• Use of overhead crane to setup and move parts.
• Follow ABS established safety practices and regulation.  Reports any unsafe conditions or practices to management of ABS Machining Inc.

Minimum Qualifications ↓

• Minimum 5 years CNC "CUSTOM - ONE OFF" machining experience, consisting of machine setup & Operation of CNC Boring Mills (Horizontal)
• General machinist certification an asset.
• Challenged daily in working with large complex & fabricated components, where material variation and conditions require an analytical approach to machining of product.
• Ability to read & interpret blue prints, drawings, charts & tables.
• Motivated and able to work independently with minimal supervision.
• Strong analytical skills and keen attention to detail.
• Previous experience working with overhead cranes an asset.

APPLY HERE ↓

Essential Role ↓

• Create N/C Programs for the Shop Floor using MasterCam 2017
• Create and set up tooling sheets per N/C Programming requirements.
• Requisition special tools required to complete jobs.
• Attain and assess geometry file from the customer.
• Test program accuracy to identify faults. Make program corrections as required.
• Interact with inspection to ensure that coordinates correspond with the model.
• Follow ABS established safety practices and regulation.

Minimum Qualifications ↓

• Minimum 10 years CNC programming experience
• Knowledge of machining principles, tooling, fixturing and tool set up for large specialized machining.
• General machinist certification an asset.
• Fluent in MasterCam.
• Strong turning experience, knowledge of Concepts NREC is an asset but not required.
  
• Challenged daily in working with large complex & fabricated components, where material variation and conditions require an analytical approach to machining of product.
• Ability to read & interpret blue prints, drawings, charts & tables.
• Motivated and able to work independently with minimal supervision.
• Strong analytical skills and keen attention to detail.

APPLY HERE ↓